| Maytag Twin Cylinder Engine 1937-52 | |||
|---|---|---|---|
| PART NO. | DESCRIPTION | PRICE | CONDITION |
| 6680-1 | COIL SPRING FOR S 277 | $0.85 | REPRO |
| 12286 | GASKET FOR EXHAUST 1-REQ | $2.00 | USED |
| 12286-1 | GASKET FOR EXHAUST 1-REQ | $3.00 | REPRO |
| 12720-1 | BUSHING WITH RETURN OIL GROOVE 1-REQ | $14.00 | REPRO #3 |
| 12724 | STEEL BALL FOR STARTER 4-REQ | $0.25 | USED |
| 12752-1 | BUSHING WITH NO OIL GROOVE 1-REQ | $8.00 | REPRO #3 |
| 12786 | EXHAUST HOSE 1-3/16" x 8' 1 LB PER FOOT | $5.00 | USED |
| 12803 | TAPER PIN 1-REQ | $1.00 | USED |
| 12803-1 | TAPER PIN 1-REQ | $2.00 | REPRO |
| 12843 | FERRULE FOR EXHAUST HOSE | N/A | CALL |
| 12976 | YIELD TOOTH SHOULDER SCREW | $1.50 | REPRO |
| 13592 | PATENTS DECAL | $10.00 | NEW |
| 13915-1 | CHECK VALVE BODY FOR DISC TYPE STRAINER (UPPER) | $6.00 | REPRO |
| 13917-1 | GASKET FOR DISC TYPE STRAINER | $1.00 | REPRO |
| 13918-1 | VALVE DISC FOR DISC TYPE STRAINER | $1.50 | REPRO |
| 14036 | PIPE PLUG 1/8" ( FOR S 306, S 321, & S 322) TANK | $0.75 | NEW |
| 14073 | DECAL (NOTICE WARRENTY) USED 1933 AND LATER | $6.00 | NEW |
| 14088 | CARBURETOR AIR CAP SPRING | N/A | N/A #3 |
| 14430 | SNAP RING FOR CRANKSHAFT | $1.00 | USED |
| 14431-1 | WRIST PIN RETAINER PLUG. QTY:4 | $4.00 | REPRO |
| 14432 | WRIST PIN | $2.00 | USED |
| 14433 | GOVERNOR VALVE ( GO TO ASS3962) | $5.00 | USED |
| 14435 | GOVERNOR SPACER | $1.00 | USED |
| 14436 | GOVERNOR SCREW (NO COTTER KEY) | $1.50 | USED |
| 14437 | CARBURETOR JET | $3.00 | USED |
| 14438 | INTAKE CONNECTION | $5.00 | USED |
| 14439 | INTAKE CAP | $3.50 | USED |
| 14440 | INTAKE SHELL | $3.50 | USED |
| 14441 | INTAKE SHELL & CAP ASS'Y | $6.00 | USED |
| 14442-1 | BEARING GASKET .015 1-REQ | N/A | Discontinued |
| 14443-1 | BEARING GASKET .009 1-REQ | $1.75 | REPRO |
| 14444-1 | GASKET SET Click here to see the Gasket Set | $24.00 | REPRO |
| 14445-1 | CYLINDER HEAD GASKET 2-REQ | $4.50 | REPRO |
| 14446-1 | BEARING GASKET .003 | $1.75 | REPRO |
| 14447-1 | BEARING GASKET .005 | $1.75 | REPRO |
| 14448 | INTAKE LOCK NUT | $1.00 | USED |
| 14449-1 | EXHAUST MANIFOLD & CYLINDER GASKET 2-REQ | $1.75 | REPRO |
| 14450-1 | FUEL TANK GASKET 1-REQ | $7.50 | REPRO |
| 14451 | OIL RETAINER FLYWHEEL END (NOT A SEAL) | $0.50 | USED |
| 14452 | OIL RETAINER STARTER SIDE (NOT A SEAL) | $0.50 | USED |
| 14454 | STUD PIN FOR STARTER | $2.00 | USED |
| 14455-1 | SNAP RING FOR STUD PIN (REPRO OR USED) | $1.00 | REPRO |
| 14456 | ALUMINUM WASHER | $0.25 | USED |
| 14457-1 | TENSION SPRING FOR STARTER | $2.00 | REPRO |
| 14463 | PULLEY WASHER | $3.50 | USED |
| 14464 | PIPE PLUG 1/4" - IN S 298 | $0.25 | USED |
| 14465-1 | GASKET FOR GAS CAP | $1.50 | REPRO |
| 14472 | #10 - 32 x 5/8" FIL HD. MACHINE SCREW IN CONN. ROD | $0.50 | USED |
| 14522 | THRUST WASHER FOR BREAKER CAM | $2.00 | USED |
| 14523 | BREAKER CAM FOR EISEMANN IGNITION | $3.25 | USED |
| 14524 | FLYWHEEL KEY | $10.00 | USED |
| 14530 | SPARK PLUG FOR ALL TWINS (295 AUTOLITE) - (HOT 458) | $3.25 | NEW |
| 14534 | RUBBER NIPPLE FOR SPARK PLUG TERMINAL | $0.75 | USED |
| 14534-1 | RUBBER NIPPLE FOR SPARK PLUG TERMINAL | $3.50 | REPRO |
| 14538 | CLAMP FOR HIGH TENSION CABLE | $0.25 | USED |
| 14542 | WASHER SPLIT LOCK ON 54045-X & 54050-X | $0.05 | USED |
| 14546 | RUBBER GROMMET FOR HIGH TENSION CABLE | N/A | Discontinued |
| 14546-1 | RUBBER GROMMET FOR HIGH TENSION CABLE | $1.25 | NEW |
| 14547 | SPACER WASHER FOR BREAKER LEVER .050" | $0.25 | USED |
| 14549 | SPACER WASHER FOR BREAKER LEVER .015" | $0.25 | USED |
| 14550 | WASHER SPLIT LOCK (GO TO 14542) | N/A | N/A |
| 14625 | FERRAL FOR AIR CAP SPRING | N/A | N/A |
| 14626 | AIR CAP SPRING (GO TO 14088) | N/A | N/A |
| 14875 | #14 X 1/2 HEX HD. SCREW SELF TAPPING (S 334) | $0.25 | USED |
| 14876 | SELF-TAPPING SCREWS FOR (S 334) TANK F 5-REQ | $0.75 | USED |
Back to the Main Page Back to the Top Next Page Previous Page Please click here to contact Bob.
