| Maytag Single Cylinder | |||
|---|---|---|---|
| PART NO. | DESCRIPTION | PRICE | CONDITION |
| GS92 | GASKET SET. Click here to see the entire Gasket Set. | $19.50 | REPRO |
| 6023-1 | LEAD WASHER FOR CARBURETOR SCREW Set of 4. | $3.95 | REPRO |
| 6680-1 | COIL SPRING FOR S-277 | $0.85 | REPRO |
| 6831 | NUT FOR CRANKSHAFT | $1.00 | USED |
| 6831-1 | NUT FOR CRANKSHAFT | $2.00 | NEW |
| 6989 | HEADLESS SCREW FOR FOOT LEVER | $0.75 | USED |
| 10008 | BRAKE SHOE FOR FOOT LEVER | $0.10 | USED |
| 12121 | WOODRUFF KEY FOR CRANKSHAFT | $0.50 | USED |
| 12121-1 | WOODRUFF KEY FOR CRANKSHAFT | $0.50 | NEW |
| 12141-1 | COIL SPRING FOR NEEDLE VALVE | $1.50 | REPRO |
| 12285-1 | GASKET FOR CYLINDER & CRANKCASE 1-REQ | $5.00 | REPRO |
| 12286 | GASKET FOR CYLINDER & EXHAUST MANIFOLD 2-REQ, COPPER | $2.00 | USED |
| 12286-1 | GASKET FOR CYLINDER & EXHAUST MANIFOLD 2-REQ | $3.00 | REPRO |
| 12287 | WRIST PIN 7/16 x 2-5/16" | $5.00 | USED |
| 12317 | STEEL SHIM WASHER .005 | $1.35 | USED |
| 12318 | STEEL SHIM WASHER .010 | $1.00 | USED |
| 12319 | STEEL SHIM WASHER .020 | $1.00 | USED |
| 12320 | STEEL SHIM WASHER .030 | $1.00 | USED |
| 12592-1 | GROUND STRAP | $2.50 | REPRO |
| 12593-1 | GROUNDING PULL WIRE ROD | $2.50 | REPRO |
| 12592-3 | GROUND SWITCH AND ROD | $4.95 | REPRO |
| 12592 | SPRING SWITCH AND ROD | $2.50 | REPRO |
| 12720-1 | BUSHING WITH RETURN OIL GROOVE 2-REQ | $14.00 | REPRO #3 |
| 12721 | STUD PIN FOR STARTER LEVER | $2.00 | USED |
| 12722-1 | FELT WASHER FOR CRANKSHAFT 1-REQ | $4.00 | REPRO |
| 12724 | STEEL BALL FOR STARTER 4-REQ | $0.50 | USED |
| 12725-1 | GASKET FOR FUEL TANK 1-REQ | $7.50 | REPRO |
| 12726-1 | GASKET FOR CRANKCASE AND BEARING 1-REQ | $4.00 | REPRO |
| 12727-1 | GASKET FOR CARBURETOR TO BLOCK 1-REQ | $3.00 | REPRO |
| 12731-1 | TENSION RETURN SPRING WITH 2 C-PINS | $3.00 | REPRO |
| 12736 | PIVOT BOLT FOR GOVERNOR ARM | $2.00 | USED |
| 12737-1 | AIR VALVE FOR CARBURETOR | $6.00 | REPRO |
| 12738 | AIR VALVE CAP FOR CARBURETOR | $4.00 | USED |
| 12738-1 | AIR VALVE CAP FOR CARBURETOR | $10.00 | REPRO |
| 12739 | SPRING FOR AIR VALVE IN CARBURETOR | $2.00 | REPRO |
| 12740-1 | AIR SCREEN IN CARBURETOR | $1.00 | REPRO |
| 12741 | NEEDLE VALVE IN CARBURETOR | $9.95 | USED |
| 12848-1 | Lock Washer for 12741 | $.25 | NEW |
| 12741-1 | NEEDLE VALVE IN CARBURETOR OVERSIZE .001 | $9.95 | REPRO #3 |
| 12742 | HANDLE FOR NEEDLE VALVE | $9.95 | USED |
| 12742-1 | HANDLE FOR NEEDLE VALVE | $9.95 | REPRO |
| 12743-1 | AIR SCREEN RETAINER FOR ASS2901-1 | $4.00 | REPRO |
| 12744 | LOCKNUT FOR NEEDLE VALVE | $0.25 | USED |
| 12745-1 | NEEDLE VALVE ASS'Y (NEEDLE, SPR, LEV, NUT) | $19.95 | REPRO #3 |
| 12745 | NEEDLE VALVE ASS'Y (NEEDLE, SPR, LEV, NUT) | $19.95 | USED |
| 12752-1 | BUSHING NO OIL GROOVE 1 REQ | $8.00 | REPRO #3 |
| 12753-1 | AIR VALVE SEAT IN CARBURETOR | $6.00 | REPRO #3 |
| 12754 | WASHER FOR S-239 .030 THICK1-REQ | $1.00 | USED |
| 12757 | MAGNET RESTORED - RECHARGED - USED. AVAILABLE CALL | $18.00 |
USED #3 |
| 12776 | CONNECTING ROD BOLT 2-REQ | $1.50 | USED |
| 12785-1 | GASKET FOR FLYWHEEL & COUPLING DISC 1-REQ | $2.00 | REPRO |
| 12786 | EXHAUST HOSE 1-3/16" CALL FOR CONDITION | $7.50 | PER FOOT |
| 12799 | STANDARD WRENCH | $12.00 | USED |
| 12800 | 1/4" CASTELLATED NUT FOR 12776 | $1.00 | USED |
| 12801 | 5/16 x 7/8" HEX HD. CAP SCREW SLOTTED OR 51336 | $0.25 | USED |
| 12802 | 5/16 x 1-1/4" HEX HD. CAP SCREW SLOTTED USED ON S242 | $0.50 | USED |
| 12803 | TAPER PIN | $1.00 | USED |
| 12803-1 | TAPER PIN | $2.00 | REPRO |
| 12804 | LOCK WASHER FOR AIR VALVE IN CARBURETOR | $3.00 | USED |
| 12804-1 | LOCK WASHER FOR AIR VALVE IN CARBURETOR | $7.00 | REPRO |
| 12825 | GOVERNOR SPRING 1-REQ | $5.00 | USED |
| 12843 | FERRULE FOR EXHAUST HOSE | N/A | N/A |
| 12844-1 | GUIDE FOR SWITCH ROD | $5.00 | USED/REPRO |
| 12869 | TERMINAL FOR CABLE 1-REQ | $0.25 | NEW |
Back to the Main Page Go to the Next Page Please click here to contact Bob.
